Avenir's 200 Series Seatpost is fabricated from 6061 aluminum so it's light and tough. It's equipped with a micro-adjustable, 1-bolt head design for quick-n-easy setup.
Avenir's Comfort-Plus Pedals make any bike feel like a comfortable cruiser with wide platforms for easy pedaling. They're made with a dual-compound composite for a great grip and some vibration damping. They also have reflectors for visibility at night. Perfect for everything from your beach cruiser to your commuter.
$0.20 - $13.64
- High roundness grade 300 balls in a shop dispenser bottle - 1/8-inch, 500/bottle - 7/32-inch, 500/bottle
$0.24 - $64.99
Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.
Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes
- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
Replacement reservoir cap screw for Hope brakes.
Replacement bearing for the lower half of YST8003 #7 headset.
Replace the top bearing in your YST8300 headset with these caged ball bearings.
RaceFace X-Type Bottom Bracket Outer Race Seal - Replacement for cracked or broken X-Type outer race seals - Sold each
- Aheadset preload adjusting bolt
$0.99 - $52.50
- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm
- w/Nut - 1-3/4-inch
- 8x1mm Allen head
- Model: Replacement bolt - Compatibility: Allen, M5x16
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
$1.00 - $36.00
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$1.00 - $12.00
- Hoods with (FD) are Flight-Deck compatible
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
- Aluminum w/lock nut - 18mm long/6mm O.D.
- Replacement cable anchor bolt for brakes - Includes nut and washer
Dimension Anodized M5 Bolts fits most standard bottle boss and accessory mounts. - Fits most standard bottle boss and accessory mounts - Tapered socket head with 4mm broach M5 diameter bolt, 0.8mm thread pitch - 16mm thread length - Aluminium - Sold individually
- Aluminum w/lock nut and mount - Slotted mount design
- Crank dust cap - Works with most three-piece crank models
- Chrome - Sold individually
- M8 Top Plate Bolt
- Protects cranks from damage caused by overtightening pedals - Can be used for bike fit adjustments, Dependent on pedal thread length engagement
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
- For MTB levers - 7mm x 1mm - Aluminum construction
- Routes cables underneath the bottom bracket - Will not rust or corrode
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
Stainless steel pedal washers - Sold in pairs
$1.99 - $14.00
- HFX-9 kit includes a pre-crimped inline caliper fitting - Sole and Stroker Ryde kit includes specific fittings for lever and caliper
Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.
Replacement dust cover for Origin 8 XLT Cranksets
- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag
- Sunlite Cottered Pins
- One-piece steel construction - Chrome plated
- M8 Top Plate Nut
- Rubber - Color: Black
- Standard steel replacement
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
$2.00 - $23.00
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front
- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction
• Replacement nut for recessed caliper brakes
Brass compression olive for Hope hydraulic disc brakes.
Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks
• Compatible with most side pull and center pull brakes • All weather compound
Handlebar Plug Chrome. Made in Japan. Price is per plug.
Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
The Gyro G3 upper top plate is designed for use with the G3 detangler.
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
Standard replacement star nuts for threadless steerers.
- Includes everything needed to mount non-threaded brake pads to cantilever brake arms
• With bolt & nut • 1 1/8-inch = 28.6mm • 1-inch = 25.4mm
Page 1 of 84 Next page