Need more room with your Kuat Vagabond X? Kuat's Xtender adds 21-inches to your basket, and comes with load bars for even more mounting options. Now you don't have to choose what gear makes the cut for your next outdoor adventure. - Comes with 2 load bars - Adds 21" to your Vagabond X (sold separately) - 160 lb total load capacity - Makes Vagabond X 41" x 73" x 7" - Load bars measure 44"
$43.00 - $50.00
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Secure and easy-to-use roof-mounted front wheel holder keeps muddy and bulky wheel out of the trunk. - Fits quick-release wheels out of the box and thru-axle wheels with adapter accessory - Fits all wheels from 20" up to 29" and tire size up to 3" - Fits 9mm quick-release bikes - Fits 12-20mm thru-axle bikes with adapter accessory (adapter sold as an accessory) - Holder arm can be separated from the base for convenient loading of the front wheel off the car - Holder arm with the wheel installed easily docks to the base - Locks the front wheel to the holder and the holder to the roof rack (locks included) - Ability to fold flat when not in use - Fits most roof racks up to 90mm by around-the-bar solution including Thule SquareBar roof rack with included adapter
Fitting kit required for perfect fit of the roof rack to a specific car.
Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 108cm / 43 in
The FatCat EVO is our sleekest, quietest, and sweetest ski & snowboard mount. It is wide enough to carry six pairs of powder skis—up to 136mm at the tip—or four snowboards. FatCat EVO mounts tool-free on virtually any roof rack. The OverHang clamp attachment point makes it easier to reach your skis or boards. SKS locks are built in for added security, and the mirror black finish looks awesome on your roof. For T-Slot crossbars, add the SmarT-Slot Kit 2 for a super-sleek setup (sold separately). - Easily carries six pair of skis—up to 136 mm wide at the tip—or four snowboards - Aerodynamic design delivers a quiet ride and streamlined good looks - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Integrated SkiLift provides clearance for tall bindings - DoubleJoint hinge expands for easy use with thick skis and boards - For easier access to skis and snowboards, the OverHang clamp-mounting position shifts the mount further out on your vehicle's roof rack - Large button makes it easy to open with gloves or mittens on - Sleek mirror-black finish looks great on your roof - Integrated SKS (Same Key System) locks included - Compatible with T-slot crossbars—just add our SmarT-Slot Kit 2 (sold separately) Product Specs: - Weight: 12.75 lbs. - Dimensions: L 40.50 in x W 3.75 in x H 5.25 in - Minimum Crossbar Spread 12.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
The sleekest bike rack ever to rip down I-70. RockyMounts JetLine is a highly crafted fork mount with a low profile and streamlined aluminum head and tray, designed to fit Slotted Crossbars (RockyMounts Ouray, Thule AeroBlade, Yakima Whispbar and JetStream, Rhino Rack Vortex, factory bars from Audi, BMW, Mercedes, Mini, Volvo, VW), Thule Square Crossbars, and Yakima Round Crossbars. The JetLine will hold bikes with a quick-release front wheel and holds skinny road tires up to 2.7-inch mountain bike tires. The simple, long-throw quick-release function allows easy bike loading and unloading. JetLine is compatible with disc and standard brake systems. Lock rack to car and bike to rack with RockyMounts lock cores and keys (sold separately—requires a 2-pack).
RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
$219.00 - $249.00
Introducing the new Switch ski and snowboard rack from Kuat. This rack gets in positions your yoga teacher would envy. Switch it up for loading and transporting gear to the mountain and switch it down when you're commuting around town. Fashionable and functional all for a price you can get down with, too. - Folds to a low-profile, aerodynamic orientation - Universal security mounts fit round, square or aero bars - Integrated locks included
$63.00 - $126.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
- Easy-to-use lockable stainless steel skewer with oversized lever makes for secure and easy loading - Aerodynamic, durable aluminum tray and adjustable wheel strap with ratchet buckle provide stable mounting platform - Compatible with most 9mm disc brakes - Fits bicycle wheelbases up to 48" and tire widths up to 2.3" - Fits on SportRack Roof Rack Systems, square, round and most factory racks
Thule's Wheel On solves the problem of where to put your front wheel when your bike is on your roof rack. Plus, it helps keep the inside of your car clean, too.
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 150cm / 60 in
Use Yakima's MegaWarrior Stretch Net to secure and control loads on the MegaWarrior rooftop cargo rack (sold separately). The multi-hook design is versatile and easy to use.
Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).
No longer will you have to decide between the turkey fryer, pop up tent, folding love seat, chef kitchen, dog tent, and a 128 capacity cooler. The Xtender adds 21 inches to the Vagabond X and comes with burly load bars for all your other toys. Leave nothing behind. - Comes with 2 load bars - Adds 21" to your Vagabond X - 160lb total load capacity - Makes Vagabond X 41" x 73" x 7" - Load bars measure 44"
Prioritizing the buffet of gear laid out on your living room floor can be a painstaking process. Should you take this? Will you need that? We have an easier solution: Throw the new Mini-Skinny on the roof and take all of it. With as much space as a comparable “fat” basket and 50-percent more usable crossbar space, you’ll be packing your gear, your friend’s gear and your friend’s dog’s gear. Half the width—Twice the fun. Offers fit options for the best of both worlds. Your worlds, whatever worlds they may be. Be it cycling, kayaking, or road tripping to the ski lodge. The Skinny’s distinct design provides the same load surface as other “fat” cargo racks while leaving 50% of usable crossbar space for, you know, whatever you need. -1 Bike Capacity (50lb bike, 9mm skewer) -Roof bar mounts come equipped with lock cores -Comes fully assembled -Matte Black Powder Finish -Fairing included with silver accents -Mounts to most factory & all aftermarket cross bars -1 Integrated bike mount with skewer -160 lb. capacity with bike & gear (always adhere to cross bars posted weight limits) -Max crossbar size-4.5” wide by 1.75” thick -2 piece design with option for Mini Skinny Extender to allow for more room -Two-Piece: 68” L x 23” W x 7” H
Spider cargo net that works with the Kuat cargo racks. This includes the Vagabond and Vagabond X.
The perfect combination of form and function, the Vagabond X increases your vehicle’s load capacity by a staggering 160 pounds – and that can include up to two bikes with 9mm skewers. With locking mounts, two 9mm skewers and the capacity to accommodate even larger loads with the Xtender, this Vagabond pulls its weight and more. Includes all the functionality of the Vagabond to get your bikes and gear on the road with ease, and we dare you to find a better-looking roof basket on the market. A bit showier than the original, the Vagabond X features locking mounts. - Locking mounts provided - 2 integrated 9mm front skewer mounts - 160lb Load capacity - 2 Bike - 50 lb max for each - Silver decals on front and side - Ability to add an extension (Xtender) making the rack 73" long - 41" x 52" x 7" - Mounts to most factory and aftermarket roof bars
Yakima's 1A Raingutter Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The 1A Raingutter Towers adjust to fit your vehicle's roof line and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Thule's XK3 Xsporter Rack Adapter makes your Toyota Tacoma compatible with Thule's revolutionary Xsporter truck bed rack system (sold separately).
Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 118cm / 47 in
Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 135cm / 53 in
Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 118cm / 47 in
Premium fork mount roof bike rack for the bike enthusiast with fast and easy mounting for both Thru-axle and standard Quick-release bikes. - Easily mount Thru-axle bikes (9-15mm) and standard Quick-release bikes (9mm). Fits 20x110mm Thru-axle bikes with an additional adapter (sold separately) - Accommodates bikes with disc brakes - Fasten your bike to the fork adapter on the ground for easy mounting - The bike slides into the carrier on a guided track on the fork adapter and clicks into place - Convenient and easy installation of fork adapter for a secure bike fit - The fork mount rack is easy and safe to mount thanks to audible and visual confirmation of correct mounting - Unmount bikes from the rack easily with a release lever - Safe mounting of Quick-release bikes thanks to Thule AcuTight torque limiter knob that click when optimal torque is reached - Locks the bike to the bike rack and the bike rack to the roof racks (locks sold separately) - Easy to switch carrier position from one side of the vehicle to the other
Whether you and your crew enjoy leisurely stand-up paddling or an intense session surfboarding, the SUP Crossbar Pads loves both. Made of heavy-duty ballistic nylon, these 30” pads give you full coverage on aerodynamic crossbars. - Ideal for SUPs and Surfboards - Heavy-duty ballistic nylon construction - Full coverage 30” Crossbar Pad with Velcro closure - Fits factory and aerodynamic crossbars - Works great with BigStack, KayakStacker or Heavy-Duty Straps - Comes with 2 pads per package
Thule's ThruRide roof-mounted bike carrier makes it easy to mount almost any bike with a thru-axle fork—no adapters needed. The ThruRide fits forks with 12-20mm thru-axles on anything from fat bikes to XC race rockets to downhill rigs. To load your bike, simply remove the front wheel and re-install the thru-axle into the fork. Lift the bike into the rack, and close the convenient one-handed clamp down on the axle. Then, dial down the clamping pressure to give your bike a secure ride. The ThruRide also works with traditional 9mm quick release forks using an adapter (535SKR sold separately). The rear of the rack is crafted from Thule's aerodynamic "D" shaped low-profile tray. And, tool-free universal mounting makes the ThruRide easy to install on Thule rack systems, as well as round bars and most factory racks.
-Extends the Mini Skinny by 14" -Integrated 9mm Fork Mount -Retains 50% of usable crossbar space -Locking roof bar mounts -Basket comes fully assembled
Page 1 of 2 Next page